Sunray’s DC Range of submersible solar pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state of the art technology. The range includes 3″, 4″ and 6″ pumps.
Each pump is pre-paired with a DC motor and each unit comes standard with the following:
- DC Controller
- Water level sensors
- Piece of cable
- Cable connector
- Spare impeller
Application
- Potable water supply from deep wells
- Agricultural irrigation, livestock watering etc
- Municipal and industrial
- Pressure boosting
- Fountains etc
Operating conditions
- Maximum ambient temperature: 30°C
- Sand content: Maximum 50g/m³
- Maximum immersible depth: 40m
Pumped liquid
- Clean, non-corrosive and non-abrasive liquids
Overview
Solar photo-voltaic panels convert sunlight to electrical energy which is passed to the solar pump controller. The solar controller stabilizes the voltage to drive the motor of the pump. If backup batteries (optional) are available the pump controller can charge them. The stored energy can be used at a later date when the sunlight may not be adequate to drive the pump. Water level sensors are also connected to the controller and can be used to protect the pump from running dry as well as automatically turn the pump off when a water tank is full. The system operates completely independent of any utility or generator power and is ideal for rural applications.
Materials
Outlet: Stainless steel
Pump body: Stainless steel
Motor body: Stainless steel
Screw: Stainless steel
Bearings: NSK
| 3″ Helical pumps | Voltage | Rated Power | Panels Required | Max Flow | Max Head | Outlet | Pump diameter | |||
| (V) | (W) | Wp | Qty | Vmp | Array V | (m³/h) | m | (in) | (mm) | |
| JS3-0.9-32 | 24 | 100 | 160 | 80Wx2pcs | 17-18 | 36 | 0,9 | 32 | 3/4″ | 76 |
| JS3-1.3-50 | 24 | 120 | 180 | 90Wx2pcs | 17-18 | 36 | 1,3 | 50 | 3/4″ | 76 |
| JS3-1.8-60 | 24 | 180 | 300 | 150Wx2pcs | 17-18 | 36 | 1,8 | 60 | 3/4″ | 76 |
| JS3-1.8-80 | 24 | 210 | 360 | 180Wx2pcs | 35-36 | 36 | 1,8 | 80 | 3/4″ | 76 |
| JS3-1.8-100 | 24 | 270 | 500 | 250Wx2pcs | 35-36 | 36 | 1,8 | 100 | 3/4″ | 76 |
| JS3-2.1-100 | 48 | 450 | 720 | 180Wx4pcs | 17-18 | 72 | 2,1 | 100 | 3/4″ | 76 |
| JS3-2.1-120 | 48 | 540 | 800 | 200Wx4pcs | 17-18 | 72 | 2,1 | 120 | 3/4″ | 76 |
Materials
Outlet: Stainless steel
Pump body: Stainless steel
Motor body: Stainless steel
Screw: Stainless steel
Bearings: NSK
| 4″ Helical pumps | Voltage | Rated Power | Panels Required | Max Flow | Max Head | Outlet | Pump diameter | |||
| (V) | (W) | Wp | Qty | Vmp | Array V | (m³/h) | m | (in) | (mm) | |
| JS4-3.0-60 | 36 | 450 | 600 | 100Wx6pcs | 17-18 | 54 | 3 | 60 | 1″ | 100 |
| JS4-2.5-80 | 48 | 500 | 660 | 165Wx4pcs | 35-36 | 72 | 2,5 | 80 | 1″ | 100 |
| JS4-3.6-80 | 48 | 750 | 1000 | 250Wx4pcs | 35-36 | 72 | 3,6 | 80 | 1″ | 100 |
| JS4-4.0-100 | 72 | 1000 | 1410 | 235Wx6pcs | 35-36 | 108 | 4 | 100 | 1″ | 100 |
| JS4-3.2-120 | 72 | 1000 | 1410 | 235Wx6pcs | 35-36 | 108 | 3,2 | 120 | 1″ | 100 |
| JS4-2.5-140 | 72 | 1000 | 1410 | 235Wx6pcs | 35-36 | 108 | 2,5 | 140 | 1″ | 100 |
Features
- 100% Copper wire, cold-rolled silicon steel sheet
- Rubber of sealing and rubber stator
- Completely made of Stainless steel (304 or 316)
- MPPT technology to maximize power from PV array
- DC Brushless motors, designed for solar (>90% efficient)
- Dry-running protection
- Over voltage and over current protection
- Soft starting
- Automatic stop/restart according to water levels in tank and well
Material
Outlet: Stainless steel 316
Pump body: Stainless steel 316
Motor body: Stainless steel 316
Screw: Stainless steel 316 with star nut inserted in rubber
Bearings: NSK
| 3″_Helical_Pumps Type II | Voltage | Rated Power | Panels Required | Array Vmp | Max Flow | Max Head | Outlet | Pump diameter | ||
| (V) | (Hp) | (W) | Wp | Qty | (m³/h) | m | (in) | (mm) | ||
| HRP3-24-0.1HP | 24 | 0,1 | 80 | 180W | 1 | 36V | 1 | 30 | 3/4″ | 76 |
| HRP3-24-0.2HP | 24 | 0,2 | 140 | 200W | 1 | 36V | 1,3 | 50 | 3/4″ | 76 |
| HRP3-24-0.3HP | 24 | 0,3 | 210 | 180W | 2 | 36V | 1,8 | 80 | 3/4″ | 76 |
| HRP3-24-0.4HP | 24 | 0,4 | 270 | 200W | 2 | 36V | 1,8 | 100 | 3/4″ | 76 |
| HRP3-36-0.75HP | 36 | 0,75 | 500 | 300-320W | 2 | 36V | 1,8 | 115 | 3/4″ | 76 |
| HRP3-48-1.0HP | 48 | 1 | 750 | 250W | 4 | 60V | 2,3 | 80 | 3/4″ | 76 |
| HRP3-72-1.5HP | 72 | 1,5 | 1000 | 300-320W | 4 | 72V | 2,3 | 120 | 3/4″ | 76 |
| HRP3-72-2.0HP | 72 | 2 | 1500 | 200W | 8 | 72V | 2,3 | 140 | 3/4″ | 76 |
Features
- 100% Copper wire, cold-rolled silicon steel sheet
- Rubber of sealing and rubber stator
- Completely made of Stainless steel (304 or 316)
- MPPT technology to maximize power from PV array
- DC Brushless motors, designed for solar (>90% efficient)
- Dry-running protection
- Over voltage and over current protection
- Soft starting
- Automatic stop/restart according to water levels in tank and well
Material
Outlet: Stainless steel 316
Pump body: Stainless steel 316
Motor body: Stainless steel 316
Screw: Stainless steel 316 with star nut inserted in rubber
Bearings: NSK
| 4″_Helical_Pumps | Voltage | Rated Power | Panels Required | Array Vmp | Max Flow | Max Head | Outlet | Pump diameter | ||
| (V) | (Hp) | (W) | Wp | Qty | (m³/h) | m | (in) | (mm) | ||
| HRP4-36-0.75HP | 36 | 0,75 | 500 | 300-320W | 2 | 36 | 3 | 60 | 100 | |
| HRP4-48-1.0HP | 48 | 1 | 750 | 250W | 4 | 60 | 3,6 | 80 | 100 | |
| HRP4-72-1.5HP | 72 | 1,5 | 1000 | 300W | 4 | 72 | 4 | 100 | 100 | |
| HRP4-72-2.0HP | 72 | 2 | 1300 | 200W | 8 | 72 | 4,2 | 120 | 100 | |
Features
- 100% Copper wire, cold-rolled silicon steel sheet
- Rubber of sealing and rubber stator
- Completely made of Stainless steel (304 or 316)
- MPPT technology to maximize power from PV array
- DC Brushless motors, designed for solar (>90% efficient)
- Dry-running protection
- Over voltage and over current protection
- Soft starting
- Automatic stop/restart according to water levels in tank and well
Material
Outlet: Stainless steel 316
Pump body: Stainless steel 316
Motor body: Stainless steel 316
Screw: Stainless steel 316 with star nut inserted in rubber
Bearings: NSK
| 3″_Helical_Pumps | Voltage | Rated Power | Panels Required | Array Vmp | Max Flow | Max Head | Outlet | Pump diameter | ||
| (V) | (Hp) | (W) | Wp | Qty | (m³/h) | m | (in) | (mm) | ||
| SHRP3-12-0.1HP | 12 | 0,1 | 80 | 110W | 1 | 24 | 0,5 | 28 | 3/4″ | 76 |
| SHRP3-24-0.3HP | 24 | 0,3 | 200 | 180-200W | 2 | 36 | 0,76 | 72 | 3/4″ | 76 |
| SHRP3-36-0.5HP | 36 | 0,5 | 370 | 270W | 2 | 36 | 1,3 | 108 | 3/4″ | 76 |
| SHRP3-48-0.75HP | 48 | 0,75 | 500 | 110W | 6 | 54 | 1,5 | 136 | 3/4″ | 76 |
Surface Pumps
| Surface pumps | Voltage | Rated Power | Panels Required | Max Flow | Max Head | Outlet | Pump Type | |||
| (V) | (W) | Wp | Qty | Vmp | Array V | (m³/h) | m | (in) | ||
| JQB-2.0-25 | 24 | 120 | 200 | 100Wx2pcs | 17-18 | 36 | 2 | 25 | 1″x1″ | SURFACE PUMP |
| JQB-2.2-35 | 36 | 210 | 270 | 90Wx3pcs | 17-18 | 54 | 2,2 | 35 | 1″x1″ | |
| JETS-3.5-45 | 48 | 450 | 580 | 145Wx4pcs | 35-36 | 72 | 3,5 | 45 | 1″x1″ | |
| JETS-4.2-60 | 72 | 750 | 1000 | 250Wx4pcs | 35-36 | 72 | 4,2 | 60 | 1″x1″ | |
| JCPS-6.6-34 | 72 | 750 | 1000 | 250Wx4pcs | 35-36 | 72 | 6,6 | 34 | 1.25*1″ | |
| JCM-5.0-55 | 48 | 500 | 660 | 165Wx4pcs | 35-36 | 72 | 5 | 55 | 1″ | |
| JCM-5.0-80 | 48 | 750 | 1000 | 250Wx4pcs | 35-36 | 72 | 5 | 80 | 1″ | |
| JSDP-7.0-9 | 48 | 400 | 560 | 140Wx4pcs | 35-36 | 72 | 7 | 9 | 1.5″ | SEWAGE PUMP |
| JSDP-8.0-11 | 48 | 500 | 660 | 165Wx4pcs | 35-36 | 72 | 8 | 11 | 1.5″ | |
Solar Pool Pumps
| Pool Pumps | Voltage | Rated Power | Panels Required | Array V | Max Flow | Max Head | Outlet | ||
| (V) | (W) | Wp | Qty | Vmp | (m³/h) | m | (in) | ||
| JP6-6/250 | 24 | 250 | 360 | 180W x 2pcs | 35-36 | 36 | 6 | 9 | 1.5″ |
| JP13-13/370 | 48 | 370 | 600 | 300W x 2pcs | 35-37 | 54 | 13 | 13 | 2″ |
| JP17-15/500 | 48 | 500 | 720 | 180W x 4pcs | 35-36 | 54 | 17 | 15 | 2″ |
| JP21-19/900 | 72 | 900 | 1410 | 235W x 6pcs | 35-36 | 108 | 21 | 19 | 2″ |
| JP31-19/1200 | 72 | 1200 | 1800 | 300W x 6pcs | 35-36 | 108 | 21 | 19 | 2.5″ |
| JP60-13/2200 | 220/380 | 2200 | 3300 | 60 | 13 | 3″ | |||
Sunray’s SP 4″ Range of submersible solar pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state of the art technology. The SP 4″ pumps are manufactured to the highest standards for energy efficiency, dependable performance, rugged construction and long service life.
Through a carefully paired pump controller and change-over-switch, the unit can operate on both Solar and AC input for added versatility. Both single phase and 3 phase configurations are available.
Application
- Potable water supply from deep wells
- Agricultural irrigation, livestock watering etc
- Municipal and industrial
- Pressure boosting
- Fountains etc
Pumped liquid
- Clean, non-corrosive and non-abrasive liquids
Operating conditions
- Maximum ambient temperature: 30°C
- Sand content: Maximum 50g/m³
Features
- Stainless Steel construction designed and built for years of trouble free operation
- All metal parts are made of 304 SS, except for the shaft, which is made of 431 SS
- Heavy-duty stainless steel discharge head with built-in check valve for long life and ease of installation
- Smooth safety hook
- Mounting specifications are according to NEMA standards
- High quality shaft bearings providing low friction and high wear resistance
- Heavy duty SS impellers & diffusers ensuring optimal performance
- Stainless Steel strainer to restrict the entry of sand and other extraneous material.
General
The SP-05 range of AC Submersible pumps can be paired with either a single-phase 220V or a 3-Phase 380V AC motor, which can be powered through a solar controller, AC controller, or both. The power output ranges from 370W with 9 stages, up to 1.1kW with 42 stages.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Stages | Motor kW | Motor Hp | Outlet | Length | Weight | Required Pipe | H max (m) | Q max (m³/h) | Realistic Operating Point |
| SP-05-09 | 9 | 0,37 | 0,5 | 1″¼ | 356mm | 2,9 | 25mm Cl4 | 50 | 1,5 | 1000l/h @ 34m |
| SP-05-14 | 14 | 0,37 | 0,5 | 1″¼ | 461mm | 3,7 | 25mm Cl8 | 79 | 1,5 | 1000l/h @ 50m |
| SP-05-18 | 18 | 0,55 | 0,75 | 1″¼ | 545mm | 4,4 | 25mm Cl10 | 102 | 1,5 | 1000l/h @ 67m |
| SP-05-21 | 21 | 0,55 | 0,75 | 1″¼ | 608mm | 5 | 25mm Cl12 | 118 | 1,5 | 1000l/h @ 76m |
| SP-05-28 | 28 | 0,75 | 1 | 1″¼ | 755mm | 6,2 | 25mm Cl14 | 158 | 1,5 | 1000l/h @ 103m |
| SP-05-36 | 36 | 1,10 | 1,5 | 1″¼ | 946mm | 9,9 | 25mm Cl16 | 205 | 1,5 | 1000l/h @ 130m |
| SP-05-42 | 42 | 1,10 | 1,5 | 1″¼ | 1072mm | 11,3 | 25mm Cl20 | 238 | 1,5 | 1000l/h @ 155m |
General
The SP-10 range of AC Submersible pumps can be paired with either a single-phase 220V or a 3-Phase 380V AC motor, which can be powered through a solar controller, AC controller, or both. The power output ranges from 370W with 9 stages, up to 2.2kW with 48 stages.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Stages | Motor kW | Motor Hp | Outlet | Length | Weight | Required Pipe | H max (m) | Q max (m³/h) | Realistic Operating Point |
| SP-10-09 | 9 | 0,37 | 0,5 | 1″¼ | 356mm | 3 | 32mm Cl6 | 52 | 2,6 | 1800l/h @ 38m |
| SP-10-13 | 13 | 0,55 | 0,75 | 1″¼ | 440mm | 3,8 | 32mm Cl6 | 76 | 2,6 | 1800l/h @ 53m |
| SP10-18 | 18 | 0,75 | 1 | 1″¼ | 545mm | 4,7 | 32mm Cl10 | 104 | 2,6 | 1800l/h @ 73m |
| SP10-23 | 23 | 1,1 | 1,5 | 1″¼ | 650mm | 5,7 | 32mm Cl12 | 136 | 2,6 | 1800l/h @ 98m |
| SP10-28 | 28 | 1,5 | 2 | 1″¼ | 755mm | 6,6 | 32mm Cl14 | 166 | 2,6 | 1800l/h @ 122m |
| SP10-33 | 33 | 1,5 | 2 | 1″¼ | 883mm | 9,7 | 32mm Cl16 | 195 | 2,6 | 1800l/h @ 143m |
| SP-10-40 | 40 | 2,2 | 3 | 1″¼ | 1030mm | 11,5 | 32mm Cl20 | 235 | 2,6 | 1800l/h @ 170m |
| SP-10-48 | 48 | 2,2 | 3 | 1″¼ | 1198mm | 13,5 | 32mm Cl24 | 280 | 2,6 | 1800l/h @ 204m |
General
The SP-18 range of AC Submersible pumps can be paired with either a single-phase 220V or a 3-Phase 380V AC motor, which can be powered through a solar controller, AC controller, or both. The power output ranges from 370W with 6 stages, up to 4.0kW with 52 stages.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Stages | Motor kW | Motor Hp | Outlet | Length | Weight | Required Pipe | H max (m) | Q max (m³/h) | Realistic Operating Point |
| SP-18-06 | 6 | 0,37 | 0,5 | 1″¼ | 293mm | 2,4 | 32mm Cl4 | 38 | 4,5 | 3000l/h @ 26m |
| SP-18-09 | 9 | 0,55 | 0,75 | 1″¼ | 356mm | 3 | 32mm Cl6 | 57 | 4,5 | 3000l/h @ 38m |
| SP-18-12 | 12 | 0,75 | 1 | 1″¼ | 419mm | 3,6 | 32mm Cl8 | 77 | 4,5 | 3000l/h @ 52m |
| SP-18-15 | 15 | 1,1 | 1,5 | 1″¼ | 482mm | 4,2 | 32mm Cl8 | 97 | 4,5 | 3000l/h @ 69m |
| SP-18-18 | 18 | 1,1 | 1,5 | 1″¼ | 545mm | 4,7 | 32mm Cl10 | 116 | 4,5 | 3000l/h @ 80m |
| SP-18-22 | 22 | 1,5 | 2 | 1″¼ | 629mm | 5,5 | 32mm Cl 12 | 143 | 4,5 | 3000l/h @ 97m |
| SP-18-25 | 25 | 1,5 | 2 | 1″¼ | 692mm | 6,1 | 32mm Cl14 | 160 | 4,5 | 3000l/h @ 110m |
| SP-18-29 | 29 | 2,2 | 3 | 1″¼ | 776mm | 6,8 | 32mm Cl16 | 185 | 4,5 | 3000l/h @ 128m |
| SP-18-33 | 33 | 2,2 | 3 | 1″¼ | 883mm | 9,7 | 32mm Cl18 | 211 | 4,5 | 3000l/h @ 145m |
| SP-18-39 | 39 | 3 | 4 | 1″¼ | 1009mm | 11,2 | 32mm Cl20 | 251 | 4,5 | 3000l/h @ 172m |
| SP-18-45 | 45 | 3 | 4 | 1″¼ | 1135mm | 12,7 | 32mm Cl24 | 288 | 4,5 | 3000l/h @ 199m |
| SP-18-52 | 52 | 3,7 | 5 | 1″¼ | 1282mm | 14,5 | 32mm Cl28 | 335 | 4,5 | 3000l/h @ 230m |
General
The SP-25 range of AC Submersible pumps can be paired with either a single-phase 220V or a 3-Phase 380V AC motor, which can be powered through a solar controller, AC controller, or both. The power output ranges from 370W with 4 stages, up to 4.0kW with 44 stages.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Stages | Motor kW | Motor Hp | Outlet | Length | Weight | Required Pipe | H max (m) | Q max (m³/h) | Realistic Operating Point |
| SP-25-04 | 4 | 0,37 | 0,5 | 1″½ | 251mm | 2 | 40mm Cl2 | 26 | 6,6 | 4500l/h @ 17m |
| SP-25-06 | 6 | 0,55 | 0,75 | 1″½ | 293mm | 2,4 | 40mm Cl4 | 39 | 6,6 | 4500l/h @ 25m |
| SP-25-08 | 8 | 0,75 | 1 | 1″½ | 335mm | 2,8 | 40mm Cl6 | 51 | 6,6 | 4500l/h @ 34m |
| SP-25-12 | 12 | 1,1 | 1,5 | 1″½ | 419mm | 3,6 | 40mm Cl8 | 78 | 6,6 | 4500l/h @ 53m |
| SP-25-17 | 17 | 1,5 | 2 | 1″½ | 524mm | 4,5 | 40mm Cl10 | 108 | 6,6 | 4500l/h @ 75m |
| SP-25-21 | 21 | 2,2 | 3 | 1″½ | 608mm | 5,3 | 40mm Cl12 | 134 | 6,6 | 4500l/h @ 92m |
| SP-25-25 | 25 | 2,2 | 3 | 1″½ | 692mm | 6 | 40mm Cl14 | 157 | 6,6 | 4500l/h @ 108m |
| SP-25-33 | 33 | 3 | 4 | 1″½ | 868mm | 9,6 | 40mm Cl18 | 209 | 6,6 | 4500l/h @ 143m |
| SP-25-38 | 38 | 3,7 | 5 | 1″½ | 973mm | 10,9 | 40mm Cl20 | 242 | 6,6 | 4500l/h @ 166m |
| SP-25-44 | 44 | 3,7 | 5 | 1″½ | 1099mm | 12,4 | 40mm Cl22 | 279 | 6,6 | 4500l/h @ 195m |
General
The SP-40 range of AC Submersible pumps can be paired with either a single-phase 220V or a 3-Phase 380V AC motor, which can be powered through a solar controller, AC controller, or both. The power output ranges from 750W with 5 stages, up to 5.5kW with 37 stages.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Stages | Motor kW | Motor Hp | Outlet | Length | Weight | Required Pipe | H max (m) | Q max (m³/h) | Realistic Operating Point |
| SP-40-05 | 5 | 0,75 | 1 | 2″ | 412mm | 4,3 | 50mm Cl4 | 30 | 11,4 | 8000l/h @ 20m |
| SP-40-07 | 7 | 1,1 | 1,5 | 2″ | 496mm | 5,3 | 50mm Cl4 | 42 | 11,4 | 8000l/h @ 30m |
| SP-40-10 | 10 | 1,5 | 2 | 2″ | 622mm | 6,8 | 50mm Cl6 | 58 | 11,4 | 8000l/h @ 40m |
| SP-40-12 | 12 | 2,2 | 3 | 2″ | 706mm | 7,8 | 50mm Cl6 | 71 | 11,4 | 8000l/h @ 48m |
| SP-40-15 | 15 | 2,2 | 3 | 2″ | 832mm | 9,3 | 50mm Cl6 | 87 | 11,4 | 8000l/h @ 60m |
| SP-40-18 | 18 | 3 | 4 | 2″ | 958mm | 10,8 | 50mm Cl10 | 105 | 11,4 | 8000l/h @ 75m |
| SP-40-21 | 21 | 3,7 | 5 | 2″ | 1084mm | 12,3 | 50mm Cl10 | 123 | 11,4 | 8000l/h @ 87m |
| SP-40-25 | 25 | 4 | 5,5 | 2″ | 1252mm | 14,3 | 50mm Cl12 | 144 | 11,4 | 8000l/h @ 103m |
| SP-40-30 | 30 | 5,5 | 7,5 | 2″ | 1462mm | 16,8 | 50mm Cl14 | 174 | 11,4 | 8000l/h @ 125m |
| SP-40-37 | 37 | 5,5 | 7,5 | 2″ | 1753mm | 20,3 | 50mm Cl16 | 215 | 11,4 | 8000l/h @ 150m |
General
The SP-70 range of AC Submersible pumps can be paired with either a single-phase 220V or a 3-Phase 380V AC motor, which can be powered through a solar controller, AC controller, or both. The power output ranges from 1.5kW with 5 stages, up to 7.5kW with 25 stages.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Stages | Motor kW | Motor Hp | Outlet | Length | Weight | Required Pipe | H max (m) | Q max (m³/h) | Realistic Operating Point |
| SP-70-05 | 5 | 1,5 | 2 | 2″ | 505mm | 5 | 50mm Cl4 | 34 | 19 | 12000l/h @ 26m |
| SP-70-07 | 7 | 2,2 | 3 | 2″ | 635mm | 6,3 | 50mm Cl4 | 46 | 19 | 12000l/h @ 36m |
| SP-70-10 | 10 | 3 | 4 | 2″ | 830mm | 8,2 | 50mm Cl6 | 65 | 19 | 12000l/h @ 52m |
| SP-70-13 | 13 | 3,7 | 5 | 2″ | 1025mm | 10,2 | 50mm Cl8 | 85 | 19 | 12000l/h @ 68m |
| SP-70-18 | 18 | 5,5 | 7,5 | 2″ | 1350mm | 13,4 | 50mm Cl10 | 118 | 19 | 12000l/h @ 93m |
| SP-70-25 | 25 | 7,5 | 10 | 2″ | 1805mm | 17,8 | 50mm Cl14 | 163 | 19 | 12000l/h @ 129m |
4SP(S) Universal AC/DC Solar Submersible Pumps are fitted with a permanent magnet, brush-less motor, which enables the efficient use of energy from a wide range of supply options. The pump system offers the perfect water supply solution in remote areas where water is scarce, and the power supply is non-existent or unreliable. The structure of motor with double shields poses no pollution risk to drinking water. The integrated control system is built inside the motor to make it more compatible and reliable, while offering the MPPT function-Maximum Power Point Tracking, maximizing the utilization of power generated from the photovoltaic generator.
Power Supply
• Solar PV generators
• Wind driven generators
• Electrical Mains supply
• Storage batteries
• Diesel Generators (Genset)
• Solar PV generators
• Wind driven generators
• Electrical Mains supply
• Storage batteries
• Diesel Generators (Genset)
• Solar PV generators
• Wind driven generators
• Electrical Mains supply
• Storage batteries
• Diesel Generators (Genset)
Built-in Intelligent controller
The intelligent controller designed for 4SP(S) pump, offers high flexibility towards power supply source and range.
• Can be powered with either DC or AC voltage
• MPPT & DSP technology
• Intelligent parameter detection
• Soft start running• Long system’s lifetime.
Pump
• Made of 100% stainless steel AISI 304
• Single shaft and impeller design removing any imbalance
• Minimal pump vibration and noise
• Long service lifetime of the motor.
Motor
• Made of 100% stainless steel AISI 304
• Double outer and inner shielding structure
• Internal coil made from high-temperature tolerant, copper wire
• Efficiently protecting the motor under high-temperature environmentt
• Extended motor’s service lifetime.
• Water – filling lubricated rotor with top and bottom graphite-made bearing and thrust bearing made with high precision
• Co-axial rotation efficiently reduces motor’s vibration and noise and extend its service lifetime.
• Built-in, integrated Variable Frequency Converter with intelligent-speed control algorithm with a maximum speed 6000 RPM.
Supply Voltage
Flexibility with regards to power supply and power range. The motor can be supplied with either DC or AC voltage:
• AC voltage range: 1 x 60 – 300 VAC,50-60Hz
• DC voltage range: 60 – 400VDC
• Output power: 0.37 – 3.0kW for DC
• Output power: 0.37 – 2.2kW for AC
Characteristics
Water-cooled motor, safe and poses no pollution risk to drinking water
• Advanced brushless dc motor, saving energy and offering maximum efficiency
• Motor-Built-in, integrated controller, with MPPT and DSP Technology, offering the easiest and simplest installation
• Intelligent frequency conversion algorithm, maximizing efficiency and saving energy
• A high degree of flexibility with regards to power supply and power range, offering a wide range of power sources to choose from
• Can be powered from the mains and/ or power generators, guaranteeing operation day or night
• Patented technology
• Two years warranty
Overview
4SP(S) Hybrid AC/DC Solar Submersible Pumps are fitted with a permanent magnet, brushless motor, Which enables the
efficient use of energy from a wide range of supply options.The pump system offers the perfect water supply solution in
remote areas where water is scarce and the power supply is non-existent or unreliable. The structure of motor with double
shields poses no pollution risk to drinking water. The integrated control system is built inside the motor to make it more
compatible and reliable, while offering the MPPT function-Maximum Power Point Tracking, maximizing the utilization of power
generated from the photovoltaic generator.
Characteristic
• Water-cooled motor, safe and poses no pollution risk to drinking water
• Advanced brushless dc motor, saving energy and offering maximum efficiency
• Motor-Built-in, integrated controller, with MPPT and DSP Technology, offering the easiest and simplest installation
• Intelligent frequency conversion algorithm, maximizing efficiency and saving energy
• A high degree of flexibility with regards to power supply and power range, offering a wide range of power sources
to choose from
• Can be powered from the mains and/ or power generators, guaranteeing operation day or night
• Patented technology
• Two years warranty
Supply voltage
Flexibility with regards to power supply and power range. The motor can be supplied with either DC or AC voltage:
• AC voltage range: 1 x 60 – 300 VAC,50-60Hz
• DC voltage range: 60 – 400VDC
• Open circuit voltage: 60-440VOC
• Output power range: 0.37 – 3.0Kw for DC
• Output power range: 0.37 – 2.2Kw for AC
Suitable for a wide range of power supply
• Solar PV generators
• Wind driven generators
• Electrical Mains supply
• Storage batteries
• Diesel Generators (Genset)
General
The SP4/2 range of solar hybrid pumps optimally deliver 2m³/h between 60m and 145m.
Power range from 0.5Hp up to 3.0Hp, with maximum flow of 5.6m³/h and maximum head of 180m.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Rated Power | Maximum Input Power | Panel Qty | Maximum Array Voltage | Rated Current | H max (m) | Q max (m³/h) | Realistic Operating Point | |||
| HP | Min | Eco | Rcd | Vmp | Voc | ||||||
| 4SP2/7 | 0,5 | 1,3 | 2 | 5 | 8 | 234 | 281 | <9 | 76 | 5,6 | 2m³/h @ 61m with 1000W of solar |
| 4SP2/9 | 1,0 | 1,5 | 2 | 6 | 9 | 270 | 324 | <9 | 100 | 5,7 | 2m³/h @ 76m with 1200W of solar |
| 4SP2/11 | 1,5 | 1,9 | 2 | 8 | 11 | 342 | 410 | <9 | 115 | 5,7 | 2m³/h @ 99m with 1600W of solar |
| 4SP2/13 | 2,0 | 2,2 | 2 | 9 | 12 | 360 | 432 | <9 | 132 | 5,6 | 2m³/h @ 109m with 2000W of solar |
| 4SP2/16 | 2,5 | 2,8 | 2 | 11 | 12 | 360 | 432 | <9 | 162 | 5,7 | 2m³/h @ 130m with 2600W of solar |
| 4SP2/18 | 3,0 | 3,0 | 2 | 12 | 12 | 360 | 432 | <9 | 180 | 5,7 | 2m³/h @ 145m with 2800W of solar |
General
The SP4/3 range of solar hybrid pumps optimally deliver 3m³/h between 24m and 112m.
Power range from 0.5Hp up to 3.0Hp, with maximum flow of 6,6m³/h and maximum head of 170m.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Rated Power | Maximum Input Power | Panel Qty | Maximum Array Voltage | Rated Current | H max (m) | Q max (m³/h) | Realistic Operating Point | |||
| HP | Min | Eco | Rcd | Vmp | Voc | ||||||
| 4SP3/3 | 0,5 | 0,7 | 2 | 3 | 4 | 117 | 140 | <9 | 32 | 6,15 | 3m³/h @ 24m with 600W of solar |
| 4SP3/6 | 1,0 | 1,2 | 2 | 5 | 7 | 216 | 259 | <9 | 62 | 6,6 | 3m³/h @ 47m with 1200W of solar |
| 4SP3/8 | 1,5 | 1,6 | 2 | 6 | 10 | 288 | 346 | <9 | 82 | 6,6 | 3m³/h @ 63m with 1600W of solar |
| 4SP3/11 | 2,0 | 2,2 | 2 | 9 | 12 | 360 | 432 | <9 | 112 | 6,6 | 3m³/h @ 88m with 2000W of solar |
| 4SP3/13 | 2,5 | 2,6 | 2 | 10 | 12 | 360 | 432 | <9 | 132 | 7,2 | 3m³/h @ 106m with 2600W of solar |
| 4SP3/18 | 3,0 | 3,0 | 2 | 12 | 12 | 360 | 432 | <9 | 190 | 6,3 | 3m³/h @ 112m with 2800W of solar |
General
The SP4/5 range of solar hybrid pumps optimally deliver 5m³/h between 24m and 76m.
Power range from 0.5Hp up to 3.0Hp, with maximum flow of 10.1m³/h and maximum head of 160m.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Rated Power | Maximum Input Power | Panel Qty | Maximum Array Voltage | Rated Current | H max (m) | Q max (m³/h) | Realistic Operating Point | |||
| HP | Min | Eco | Rcd | Vmp | Voc | ||||||
| 4SP5/3 | 0,5 | 0,9 | 2 | 4 | 5 | 162 | 194 | <9 | 35 | 10,1 | 5m³/h @ 24m with 1100W of solar |
| 4SP5/6 | 1,0 | 1,8 | 2 | 7 | 11 | 324 | 389 | <9 | 68 | 10,2 | 5m³/h @ 47m with 1500W of solar |
| 4SP5/8 | 1,5 | 2,6 | 2 | 10 | 12 | 360 | 432 | <9 | 90 | 10,2 | 5m³/h @ 54m with 2000W of solar |
| 4SP5/10 | 2,0 | 3,0 | 2 | 12 | 12 | 360 | 432 | <9 | 112 | 10,2 | 5m³/h @ 71m with 2400W of solar |
| 4SP5/12 | 2,5 | 2,5 | 2 | 10 | 12 | 360 | 432 | <9 | 136 | 10,2 | 5m³/h @ 72m with 2600W of solar |
| 4SP5/15 | 3,0 | 3,0 | 2 | 12 | 12 | 360 | 432 | <9 | 170 | 10,2 | 5m³/h @ 76m with 2800W of solar |
General
The SP4/8 range of solar hybrid pumps optimally deliver 8m³/h between 17m and 54m.
Power range from 0.5Hp up to 3.0Hp, with maximum flow of 16m³/h and maximum head of 80m.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Rated Power | Maximum Input Power | Panel Qty | Maximum Array Voltage | Rated Current | H max (m) | Q max (m³/h) | Realistic Operating Point | |||
| HP | Min | Eco | Rcd | Vmp | Voc | ||||||
| 4SP8/2 | 0,5 | 1,1 | 2 | 4 | 7 | 198 | 238 | <9 | 25 | 15,9 | 8m³/h @ 17m with 1000W of solar |
| 4SP8/3 | 1,0 | 1,5 | 2 | 6 | 9 | 270 | 324 | <9 | 35 | 15,9 | 8m³/h @ 23m with 1200W of solar |
| 4SP8/4 | 1,5 | 2,1 | 2 | 8 | 12 | 360 | 432 | <9 | 46 | 17,1 | 8m³/h @ 33m with 1600W of solar |
| 4SP8/5 | 2,0 | 2,5 | 2 | 10 | 12 | 360 | 432 | <9 | 58 | 17,1 | 8m³/h @ 43m with 2200W of solar |
| 4SP8/7 | 2,5 | 2,8 | 2 | 11 | 12 | 360 | 432 | <9 | 80 | 16,5 | 8m³/h @ 50m with 2600W of solar |
| 4SP8/8 | 3,0 | 3,0 | 2 | 12 | 12 | 360 | 432 | <9 | 90 | 15,3 | 8m³/h @ 54m with 3000W of solar |
General
The SP4/14 range of solar hybrid pumps optimally deliver 14m³/h between 8m and 30m.
Power range from 1.0Hp up to 3.0Hp, with maximum flow of >25m³/h and maximum head of 50m.
Materials
Discharge: Stainless steel 304
Diffuser: Stainless steel 304
Impeller: Stainless steel 304
Strainer: Stainless steel 304
Shaft: Stainless steel 431
Bearings: NBR
| Model | Rated Power | Maximum Input Power | Panel Qty | Maximum Array Voltage | Rated Current | H max (m) | Q max (m³/h) | Realistic Operating Point | |||
| HP | Min | Eco | Rcd | Vmp | Voc | ||||||
| 4SP14/1 | 1,0 | 1,1 | 2 | 4 | 7 | 198 | 238 | <9 | 12 | 22,8 | 14m³/h @ 8m with 1100W of solar |
| 4SP14/2 | 2,0 | 2,0 | 2 | 8 | 12 | 360 | 432 | <9 | 26 | 25,5 | 14m³/h @ 18m with 2000W of solar |
| 4SP14/3 | 2,5 | 2,8 | 2 | 11 | 12 | 360 | 432 | <9 | 38 | 26,4 | 14m³/h @ 27m with 2600W of solar |
| 4SP14/4 | 3,0 | 3,0 | 2 | 12 | 12 | 360 | 432 | <9 | 50 | 24,6 | 14m³/h @ 30m with 2600W of solar |
DC Pump Controller
Overview
These type DC Controllers are designed to work with DC brush-less motors.
The pump, panels and switch wires are all connected directly to the controller.
| Controller Model | Array Voltage | Required Panels |
| (V) | Max (W) | |
| JS 24V Controller | 36 | 160 |
| JS 36V Controller | 54 | 600 |
| JS 48V Controller | 72 | 700 |
| JS 72V Controller | 108 | 1400 |
Single Phase AC Pump Controller (220V)
Overview
The single phase solar pump controller is a frequency inverter that converts DC solar power to 220V single phase, for use with standard AC pumps. Typical application would be for swimming pool pumps.
Features
- System diagnostics
- Motor-soft start
- Over temperature feedback
- Level control switch
- Switch to AC backup power
| Inverter Model | Inverter Output | Maximum Array Power (W) | Dimentions | ||
| (kW) | H (mm) | W (mm) | D (mm) | ||
| Single Phase Pump Inverter 0.75kW | 0,75 | 1500 | 185 | 125 | 160 |
| Single Phase Pump Inverter 1.5kW | 1,5 | 3000 | 185 | 125 | 170 |
| Single Phase Pump Inverter 2.2kW | 2,2 | 4400 | 185 | 125 | 180 |
Three Phase Pump Controller Type I (380V)
Overview
The three phase solar pump controller is a frequency inverter that converts DC solar power to either 220V or 380V three phase, for use with any IEC three-phase asynchronous motors. The controllers feature MPPT tracking for maximum efficiency.
Features
- System diagnostics
- Motor-soft start
- Over temperature feedback
- Level control switch
- Switch to AC backup power
| Inverter Model | Inverter Output | Maximum Array Power (W) | Dimentions | ||
| (kW) | H (mm) | W (mm) | D (mm) | ||
| 3 Phase Pump Inverter 0.75kW | 0,75 | 1500 | 185 | 125 | 190 |
| 3 Phase Pump Inverter 1.5kW | 1,5 | 3000 | 185 | 125 | 200 |
| 3 Phase Pump Inverter 2.2kW | 2,2 | 4400 | 185 | 125 | 210 |
| 3 Phase Pump Inverter 4kW | 4 | 8000 | 245 | 150 | 180 |
| 3 Phase Pump Inverter 5.5kW | 5,5 | 11000 | 245 | 150 | 180 |
| 3 Phase Pump Inverter 7.5kW | 7,5 | 15000 | 245 | 150 | 180 |
| 3 Phase Pump Inverter 11kW | 11 | 22000 | 320 | 215 | 200 |
| 3 Phase Pump Inverter 15kW | 15 | 30000 | 320 | 215 | 200 |
| 3 Phase Pump Inverter 18kW | 18 | 36000 | 475 | 295 | 245 |
| 3 Phase Pump Inverter 22kW | 22 | 44000 | 475 | 295 | 245 |
| 3 Phase Pump Inverter 30kW | 30 | 60000 | 475 | 295 | 245 |
| 3 Phase Pump Inverter 37kW | 37 | 74000 | 580 | 375 | 265 |
| 3 Phase Pump Inverter 45kW | 45 | 90000 | 580 | 375 | 265 |
| 3 Phase Pump Inverter 55kW | 55 | 110000 | 580 | 375 | 265 |
| 3 Phase Pump Inverter 75kW | 75 | 150000 | 755 | 460 | 330 |
| 3 Phase Pump Inverter 90kW | 90 | 180000 | 755 | 460 | 330 |
Three Phase Pump Controller Type II (380V)
Overview
The three phase solar pump controller is a frequency inverter that converts DC solar power to either 220V or 380V three phase, for use with any IEC three-phase asynchronous motors. The controllers feature MPPT tracking for maximum efficiency.
Features
- System diagnostics
- Motor-soft start
- Over temperature feedback
- Level control switch
- Switch to AC backup power
| Inverter Model | Inverter Output | Maximum Input Parameters | Dimentions |
| (kW) | H x W x D (mm) | ||
| Solar Water Pump Inverter | |||
| 0.75kW, single phase 220V Pump Inverter | 0.75kW | 11 x 250W | 255 x 300 x 137 |
| 1.5kW, single phase 220V Pump Inverter | 1.5kW | 11 x 250W | 280 x 300 x 137 |
| 2.2kW, single phase 220V Pump Inverter | 2.2kW | 11 x 250W | 280 x 300 x 137 |
| Goodrive 100-PV Solar Pump Inverter, Single Phase | |||
| 0.75kW, single phase 220V Pump Inverter | 0.75kW | 11 x 250W | 80 x 160 x 123 |
| 1.5kW, single phase 220V Pump Inverter | 1.5kW | 11 x 250W | 80 x 185 x 140 |
| 2.2kW, single phase 220V Pump Inverter | 2.2kW | 11 x 250W | 80 x 185 x 140 |
| Goodrive 100-PV Solar Pump Inverter, Three Phase | |||
| 1.5kW, 3 phase, 380V Pump Inverter | 1.5kW | 18 x 250W | 80 x 185 x 140 |
| 2.2kW, 3 phase, 380V Pump Inverter | 2.2kW | 18 x 250W | 80 x 185 x 140 |
| 4kW, 3 phase, 380V Pump Inverter | 4kW | 18 x 250W | 131 x 146 x 167 |
Single Phase Solar AC Pump Motor (220V)
| Motor | Pump Power | Volts (V) | Thrust (N) | |
| (kW) | (Hp) | |||
| AC Single phase, 0.37kW | 0,37 | 0,5 | 230V | 2000N |
| AC Single phase, 0.55kW | 0,55 | 0,75 | 230V | 2000N |
| AC Single phase, 0.75kW | 0,75 | 1 | 230V | 2000N |
| AC Single phase, 1.1kW | 1,1 | 1,5 | 230V | 2000N |
| AC Single phase, 1.5kW | 1,5 | 2 | 230V | 2000N |
| AC Single phase,2.2kW | 2,2 | 3 | 230V | 3000N |
Three Phase Solar AC Pump Motor (380V)
| Inverter Model | Pump Power | Volts (V) | Thrust (N.m) | |
| (kW) | (Hp) | |||
| AC 3 Phase, 0.37kW | 0,37 | 0,5 | 230V or 400V | 2000N |
| AC 3 Phase, 0.55kW | 0,55 | 0,75 | 230V or 400V | 2000N |
| AC 3 Phase, 0.75kW | 0,75 | 1 | 230V or 400V | 2000N |
| AC 3 Phase, 1.1kW | 1,1 | 1,5 | 230V or 400V | 2000N |
| AC 3 Phase, 1.5kW | 1,5 | 2 | 230V or 400V | 2000N |
| AC 3 Phase, 2.2kW | 2,2 | 3 | 230V or 400V | 3000N |
| AC 3 Phase, 3kW | 3 | 4 | 230V or 400V | 5000N |
| AC 3 Phase, 4kW | 4 | 5,5 | 230V or 400V | 5000N |
| AC 3 Phase, 5.5kW | 5,5 | 7,5 | 230V or 400V | 5000N |
| AC 3 Phase, 7.5kW | 7,5 | 10 | 230V or 400V | 5000N |
Disclaimer
Prices stated are for the pumps and controllers only-No panels or accessories included
Prices are subject to change without notice
Errors and omissions excepted
Prices published does not constitute a final quotation